Dynamic fatigue testing machine
High temperature creep endurance testing machine
Automated test scheme
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Pendulum impact testing machine
Drop hammer impact testing machine
Horizontal testing machine
Special testing machine
Fluid pressure testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment Overview:
The robot automatic electronic tensile testing machine is composed of electronic universal testing machine, video extension meter, scanning code system, weighing length measuring device, loading robot, sample rack, control system, software, etc. The fixture of the testing machine is a hydraulic flat push clamp。It is used for tensile test of a lot of bar samples, and it is suitable for automatic measurement of tensile properties of hot rolled ribbed bars。It is an ideal testing equipment for tensile test of batch bar samples by industrial and mining enterprises, scientific research institutes, universities, commodity inspection arbitration, technical supervision and other departments。
Technical parameters:
型号 | TSE106D-2AR | |
主机 | Maximum test force | 1000kN |
Overload protection | 150% maximum test force | |
Accuracy class | 0.5级 | |
Test force indication error | ±0.5%以内 | |
Test force resolution | Maximum deformation of 1/±1000000 FS | |
Beam speed adjustment range | 0.005-200mm/min | |
Beam travel (with flat push fixture) | 1000mm | |
Circle specimen clamping diameter range | Φ12-Φ40 | |
Sample length | 500-700mm | |
Overall dimension | 1500×820×3540 | |
电源 | AC 380V±10%, 50Hz, 12kW | |
重量 | 8000kg | |
ABB robot | 负载 | 60kg |
Scope of work | 2.05m | |
Repeated positioning accuracy | 0.06mm | |
Fully automatic extensometer | Working mode | Contact type |
Range of scale | 15-205mm | |
Resolving power | 0.2μm | |
Indication error | It changes to 0-0.For 3mm, ≤0.0015mm Deformation to 0.3-100mm, ≤0.5% | |
Clamping diameter range | Bar Φ2-Φ40mm | |
Deformation measurement accuracy | 0.5级 | |
Hydraulic clamp | Clamping mode | Hydraulic horizontal thrust |
Maximum clamping force | 1200kN | |
Opening width | 80mm | |
Circle specimen clamping diameter range | Φ 12 - Φ 40 mm | |
Specimen holder | Sample capacity | 120根 |
Sample length | 500-700mm | |
Weighing length measuring device | Weighing range | 0.1kg-50kg |
Relative error of indication | The value is ±0.5%以内 | |
Length measurement accuracy | ±0.5mm | |
Work efficiency | About 32 sticks/hour | |
System footprint | About 4000×6500mm | |
Security protection | Overload protection and other equipment safety protection devices |
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd Copyright(C)2023 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763